толеранција

толеранција

1) The range between two limiting sizes as a means of specifying the degree of accuracy. 2) The amount a given bearing dimension may vary from specifications. 3) The difference between the upper and lower limits of a dimension or a specification. 4) A means of specifying the degree of accuracy.

0 0

Paranda seda

Lisa pilt

Sõnaliik: noun
Sünonüüm(id):
Blossary:
Valdkond/domeen: Machine tools
Category: Bearings
Company: Timken
Toode:
Akronüüm-lühend:

Lisa minu sõnastikku

Muud keeled:

Seotud terminid

хабање

Machine tools; Bearings

Damage resulting from the removal of materials from surfaces in relative motion. Wear is generally described as: : Abrasive: Removal of materials from surfaces in relative motion ...

заштитни омот

Machine tools; Bearings

A metal cap that fits over the outer end of the hub to keep grease in and dirt out of the bearing assembly.

топлотно ширења

Machine tools; Bearings

The expansion caused by the increase in temperature. This may be linear or volumetric.

статична тачке

Machine tools; Bearings

The section of the helix seal lip incorporating the contact line.

штит

Machine tools; Bearings

A metal formed washer attached to the outer ring and set so it rides close to, but not contacting, the inner ring, to retain lubricant and prevent contamination.

оксидација

Machine tools; Bearings

This occurs when oxygen attacks petroleum fluids. The process is accelerated by heat, light, metal catalysts and the presence of water, acids, or solid contaminants. It leads to ...