- Industry: Semiconductors
- Number of terms: 7260
- Number of blossaries: 0
- Company Profile:
Texas Instruments (TI) designs and manufactures analog and digital semiconductor IC products for the world market. In addition to analog technologies, digital signal processing (DSP) and microcontroller (MCU) semiconductors, TI designs and manufactures semiconductor solutions for analog and digital ...
A field that globally masks or enables all interrupts.
When INTM = 0, all unmasked interrupts are enabled. When INTM = 1, all maskable interrupts are disabled. INTM has no effect on the nonmaskable RS and NMI interrupts. At reset, INTM = 1.This bit is stored in status register 0 (ST0).
Industry:Semiconductors
A semiconductor storage element containing permanent data that cannot be changed.
Industry:Semiconductors
A field that identifies the 2K page where the interrupt vectors currently reside in the system. The IPTR bits enable you remap the interrupt vectors to RAM for boot-loaded operations.
At reset, IPTR = 0. These bits are stored in the processor mode status register (PMST).
Industry:Semiconductors
A semiconductor that turns analogue signals— such as sound or light—into digital signals, which are discrete or discontinuous electrical impulses, so that they can be manipulated.
Industry:Semiconductors
A field that identifies which auxiliary register (AR) is assigned to circular buffer 1. These bits are stored in the circular buffer control register (CBCR).
Industry:Semiconductors
A sequence of instructions executed repeatedly until a terminal condition prevails.
Industry:Semiconductors
A field that identifies which auxiliary register (AR) is assigned to circular buffer 2. These bits are stored in the circular buffer control register (CBCR).
Industry:Semiconductors
A serial register transfer (SRT) controller register that contains a string of continuous 1s. The number and position of these 1s depend on the video RAM (VRAM) serial access memory (SAM) width and the address lines connected to the VRAM.
Industry:Semiconductors
A field that indicates a block repeat is currently active. This bit is normally set when the repeat block (RPTB) instruction is executed and is cleared when the block repeat counter register (BRCR) decrements below 0. Writing a 0 to this bit deactivates block repeat. At reset, BRAF = 0. This bit is stored in the processor mode status register for the TMS320C5x.
Industry:Semiconductors
A serial register transfer (SRT) mode for the video controller (VC) during which an image is captured and stored in memory. Memory locations not corresponding to the captured image are preserved. See also capture mode, display mode.
Industry:Semiconductors
